Browse
4 Port
Shop
-
£43.00Smart managed switches are developed by Hikvision, featuring in easy management and maintenance. You can easily deploy, monitor and expand your surveillance system anytime and anywhere with our software platforms. You can view the network topology, monitor the health of the network and receive device alarms in real time, which greatly reduces the cost of network operation and maintenance. Key Feature • 4 × 100 Mbps PoE RJ45 ports, 1 × 100 Mbps network RJ45 port. • IEEE 802.3at/af standard for PoE ports. • Network topology management, alarm push, network health monitor. • 6 KV surge protection for PoE ports. • AF/AT camera can reach up to 300 m in extend mode. Learn More -
£42.00DS-3E0505HP-E switches are layer 2 Hi-PoE switches, providing advanced PoE power supply technology and Gigabit networks design on the basis of highperformance access to ensure stable data upload. The switches support Hi-PoE, long range, port isolation, and PoE watchdog function. Key Feature • 3 × gigabit PoE ports, 1 × gigabit Hi-PoE port and 1 × gigabit RJ45 port. • IEEE 802.3at/af/bt standard for Hi-PoE port (Max. 60 W PoE output). • IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output). • IEEE 802.3, IEEE 802.3u, IEEE 802.3x, and IEEE 802.3ab standard. • 6 KV surge protection for PoE ports. • Up to 300 m long-range transmission. • PoE watchdog to auto detect and restart the cameras that do not respond. • Port isolation to improve network security. • Gigabit network access design. • Wire-speed forwarding. • Store-and-forward switching. • Solid high-strength metal shell. • Reliable fan-free design Learn More -
KEY FEATURES
- 4*10/100Mbps PoE Ports + 2*10/100Mbps RJ45 Uplink Ports
Learn More
- Comply with IEEE 802.3, IEEE 802.3u, IEEE802.3xs standard
- Ethernet port supports 10/100Mbps adaptive
- Support POE Priority (QOS)：1>2>3>4 (The port in front has higher priority)
- Flow control mode: full-duplex adopts IEEE 802.3x standard, half-duplex adopts back pressure standard
- Support Port Auto-flip (Auto MDI/MDIX)
- Adopting store-and-forward switching mechanism
- Panel indicator monitoring status and help failure analysis
- With three gears and one key intelligent dip switch，support VLAN, Default, Extend three modes
- Support port lightning surge: common mode 4KV (level C); Electrostatic ESD: air 8KV, contact 6KV (level C) -
Special Price £20.00
was £38.00
Introduction Ertech AI806 is a 6-port Poe switch with built-in power supply. The product has three working modes: standard mode, VLAN mode and extend mode. Under the standard mode, all ports communicate freely; The device supports the standard IEEE 802.3 af/at protocol, and can automatically detect, identify and power PD devices that meet the IEEE 802.3 af/at standard, so there is no need to worry about damaging Poe or non Poe devices of private standards. Key Features: • VLAN mode: isolate 1-4 ports from each other, which can effectively suppress network storms and improve network performance • Extend mode: 1-4 ports support 250m long-distance power supply (it is recommended to select more than category 5 network cable) • It supports power supply through wireless access points (APS) and network surveillance cameras of category 5 Ethernet cables; • PD equipment supporting ieee802.3af/at standard; • Support automatic turnover of uplink ports (auto mdi/mdix); • Adopt the exchange mechanism of store and forward; • Intelligent power supply and lowest power consumption ensure the power demand of PD end; • With power circuit protection function, it can protect the safety of back-end equipment; • Zero configuration power supply is automatically supplied to adaptive equipment; • Fan free design, energy saving and environmental protection; • Support the power saving function of port without link; Network Interface 4 RJ4 5 ports with 10 / 100Mbps PoE function (Port 1~ Port 4 ) 2 10 / 100Mbps non-POE function RJ45 ports (Port 5~ Port 6) Transfer speed 100Mbps full duplex , 10 o r 100Mbps half duplex Network protocol standard IEEE 802.3 i , IEEE 802.3 u , IEEE 802.3 x , IEEE 802.3 a f / at _ _ _ Performance Specifications Backplane Bandwidth: 1.2Gbps ( non- blocking ) Network Latency ( 10 0 to 100 M bps ): 20 microseconds max (using 64 - byte packet size) Frame filtering and transfer rate: 10 M ports up to 14,800pp s 100 M ports up to 148,800pp s LED indicator Power Indicator Llink/Act indicator RESV: reserved POE indicator POE pin 1/2 (+), 3/6/(-); Power support The maximum output power of a single port is 30W . Maximum power supply: 60 W ; Physical Specifications Dimensions ( LxWxH ) : 190mm x 131mm x 40mm Weight : 1.5kg Environmental Specifications Operating temperature: 0°~40° C Working humidity: 10% ~ 90% , non-condensing Safety regulations :CE / ROHS / FCC Learn More
Filter
- Price
- Type
- Manufacturer
Featured Products
FREE NEXT DAY
DELIVERY SERVICE IN
THE UK ON ORDERS ABOVE £50
We have a dedicated team ready to help
