Wireless combined motion and glass break detector. The device helps to secure the room from intruders entering through doors and windows, and monitors the current state of the glass.
Principle of operation
The device combines the functions of two detectors — motion detector and glass break detector. It detects motion in the room at a distance of up to 12 m and registers broken glass at a distance of up to 9 m from the window.
The device detects motion even in hot climates by means of temperature compensation. It filters false alarms caused by thunder, dogs barking or the sound of passing trucks.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Electro-optical combined radio channel security detector
Type of detector
PIR sensor, electret microphone
Alarm signal delivery time
Motion detection distance
Up to 12 m
Horizontal — 88.5°
Vertical — 80°
Recommended installation height
Weight — up to 20 kg
Height — up to 50 cm
Break detection distance
Up to 9 m
Adjustable, 3 levels
Battery: CR123A battery
Power supply voltage: 3 V
Battery life — up to 5 years
Jeweller radio technology
Communication range with central unit — up to 1,200 m in an open space
Two-way communication between devices
Operating frequencies — 868.0-868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s
Operating temperature range
From +5°С to +40°С
Up to 75%
Protection against fraud
Remote setting and testing
Grade 2, CE
Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
CombiProtect combined motion and glass break detector
SmartBracket mounting panel
CR123A battery (pre-installed)