Wireless opening detector notifies of first signs of intrusion into the room through the door or window. It is installed even on roof windows which can be left open when leaving the house.
Principle of operation
The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.
The device protects even windows left open for ventilation. The accelerometer registers changes in vertical slope angle, bangs or vibration and sends an alarm to the hub.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Combined point magnetic contact and vibration radio channel security detector
Type of detector
Reed switch, accelerometer
Alarm signal delivery time
Small magnet — 1 cm
Big magnet — 2 cm
Battery: CR123A battery
Power supply voltage: 3 V
Battery life — up to 5 years
Jeweller radio technology
Communication range with central unit — up to 1,200 m in an open space
Two-way communication between devices
Operating frequencies — 868.0-868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s
Operating temperature range
From +5°С to +40°С
Up to 75%
Protection against fraud
Remote setting and testing
Diameter: 20 mm
Height: 90 mm
Grade 2, CE
Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
DoorProtect Plus opening detector
SmartBracket mounting panel
CR123A battery (pre-installed)