Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature.
Principle of operation
The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increase in the room.
It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Radio channel smoke detector with temperature sensor and built-in siren
Type of detector
Photoelectric and temperature sensors
+54°С to +65°С
Type of notification
Volume of built-in siren
Alarm signal delivery time
False alarm filter
Battery: Two CR2 batteries
Power supply voltage: 3 V
Battery life — up to 4 years
Backup battery: CR2032
Additional temperature sensor
Up to 80%
Protection against fraud
Remote setting and testing
Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
SmartBracket mounting panel
2 x CR2 batteries (pre-installed)
1 x CR2032 backup battery (pre-installed)