Small wireless detector that notifies of glass being broken by intruders. It is installed at a distance of 9 m from the window and filters events that cause false alarms about breakage.
Principle of operation
Detects broken glass using an electret microphone, which registers the sound of impact against the glass and of the glass falling.
Two-factor detection of broken glass prevents false alarms caused by thunder, dogs barking and noise from passing trucks.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Surface sound radio channel security detector
Type of detector
Break detection distance
Up to 9 m
Alarm signal delivery time
Adjustable, 3 levels
Battery: CR123A battery
Power supply voltage: 3 V
Battery life — up to 7 years
Jeweller radio technology
Communication range with central unit — up to 1,000 m in an open space
Two-way communication between devices
Operating frequencies — 868.0-868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s
Operating temperature range
From +5°С to +40°С
Up to 75%
Protection against fraud
Remote setting and testing
Diameter: 20 mm
Height: 90 mm
Grade 2, CE
Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
GlassProtect glass break detector
SmartBracket mounting panel
CR123A battery (pre-installed)