Wireless motion detector that notifies the owner of the first signs of home or office intrusion. The detector is fastened to the wall in front of the doors and other places likely of intruder entry.
Principle of operation
The device detects human presence by IR level using a passive IR sensor. The data received is digitally processed in order to prevent false alarms.
The device automatically increases or decreases the sensor sensitivity in order to accurately detect motion during hot and cold weather.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Electro-optical combined radio channel security detector
Type of detector
Alarm signal delivery time
Motion detection distance
Up to 12 m
Horizontal — 88.5°
Vertical — 80°
Adjustable, 3 levels
Recommended installation height
Weight — up to 20 kg
Height — up to 50 cm
Battery: CR123A battery
Power supply voltage: 3 V
Battery life — up to 7 years
Jeweller radio technology
Communication range with central unit — up to 1,700 m in an open space
Two-way communication between devices
Operating frequencies — 868.0—868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Device polling period — 12−300 s
Operating temperature range
From +5°С to +40°С
Up to 75%
Protection against fraud
Remote setting and testing
Grade 2, CE
Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
MotionProtect motion detector
SmartBracket mounting panel
CR123A battery (pre-installed)