Fixed heat detection

Using a fixed temperature threshold, when the environment reaches 57°C, the HEAT-WE will trigger an alarm signal to the control panel.

Loud and obvious alarms

The HEAT-WE has a built-in 85dB local sounder and flashing LED lights; providing a clear and obvious alarm when the environmental temperature reaches 57°C.

Be in control with full low-battery supervision

When the battery is running low on the radio module of the HEAT-WE, the detector will send a signal to the control panel to report the issue. If the user has the smart device app connected to the system, they’ll also receive a push notification to draw their attention to the fault.

Rest with reassurance thanks to the manual test button

With a simple press of a button it’s easy to verify the battery status to ensure the HEAT-WE is still alarm operational.

Faster installation, less invasion, upsell opportunities and the same superior security with two-way wireless technology:

• No wires, no fuss

Fully wireless means there is no need to run wiring by lifting floorboards or moving furniture; saving time and money.

• One-Push-To-Learn

A feature in all Enforcer wireless devices that means learning them onto the system can be done in seconds. Once in commissioning mode, the external test button of the HEAT-WE becomes the one-push to learn button, making installation quick and simple.

• Signal Strength Indicators (SSI)

SSI in all Enforcer wireless devices allow them to be optimally positioned during installation, without the need to refer back to the panel.

• Two-way wireless CO sensor
• Detects harmful odourless carbon monoxide (CO)
• Loud and obvious alarm
• Low-battery supervision
• Signal Strength Indicator
• Pyronix High Security Wireless Encryption Protocol
• No wires, no mess
• One-Push-To-Learn Button

• Wireless set/unset control
• Activate home automation outputs
• Backlight option
• Integrated proximity reader
• Local LED status indication
• Stylish plastics
• Optional flush backbox

Convenient, wireless and easy to use

The wireless arming keypad comes complete with system status indicators, allowing you to see the status of your system without having to go to the panel. The LEDRKP-WE has an integrated proximity tag reader, making setting and unsetting the system even easier.

Keypad controlled outputs

Wired automation outputs can be triggered on the panel, for example opening electrical gates, lighting, garage doors.

Compatibility

LEDRKP-WE is only compatible with Enforcer: V9.5 and above (Non-APP), V2.1 and above (APP), Enforcer v10 and above, and EURO: V9.5 and above (Non-APP), V2.1 and above (APP), and EURO v10 and above.

Entry and exit tones

Clear, audible tones give confirmation of entry to, or exit from the property.

Instant two way device control (ITDC)

The ITDC technology enables instant wake up and instant sleep of each device on the system, allowing continuous communication between the control panel and wireless devices whilst preserving battery power. This technology not only provides installers with total control of each device, but also gives users peace of mind that they have a reliable and secure wireless system:

• Ensuring that all wireless detection devices know when the system is armed and disarmed
• Ensuring that they are awake as soon as the system is armed

Enforcer two-way wireless technology with high security encryption

The two-way wireless protocol has been developed by Pyronix to ensure that the communication between all wireless system components is protected on a very high security level. The protocol uses the 128 bit Pyronix advanced encryption.

With new plastics, the LEDRKP/WHITE-WE is consistently stylish with the current surface and flush mount wired keypads. If flush mounting is desired, an optional backbox is available separately to achieve the perfect finish.

Signal strength indicator

One of the key advantages of implementing of the SSI technology is to allow the installer to view the wireless transmission signal strength on both the control panel and wireless devices in real time

• Dual technology detector
• Enforcer two-way wireless technology
• Instant Two Way device control (ITDC)
• Auto sensitivity
• Digital temperature compensation
• ABS plastics
• 868MHz Transceiver FM technology

Consisting of both a Passive Infrared (PIR) and microwave sensor in one housing, both sensors need to be activated simultaneously to get an alarm condition. This increases stability and makes the KX12DT3-WE ready to detect in even the harshest environments.

Volumetric detection

Ideal large area coverage for living rooms, dining rooms, kitchens and more. 

12m detection coverage

Detection coverage up to 12m.

ABS plastics

3mm polished finish produces a professional and sleek finish while reducing electrostatic interference on the PIR sensor. 

Sealed optics

Protect the detector from possible insect infestation, shields air movement in front of the pyro-electric sensor and protects against adverse reflections from inside the detector housing.

Pet Immune (PI)

The detector’s intelligent PI technology analyses the difference between an intruder and a pet signal, with immunity up to 20kg and 10m coverage range.

• Pet immunity up to 20kg
• Enforcer two-way wireless technology
• SSI (Signal Strength Indicators)
• Longer battery life with instant two-way device control (ITDC)
• Highly secure 868MHz transceiver FM technology
• ABS plastics & sealed optics

Consisting of both a Passive Infrared (PIR) and microwave sensor in one housing, both sensors need to be activated simultaneously to get an alarm condition. This increases stability and makes the KX10DTP-WE ready to detect in even the harshest environments.

Volumetric detection

Ideal large area coverage for living rooms, dining rooms, kitchens and more. 

10m detection coverage

Detection coverage up to 10m.

ABS plastics

3mm polished finish produces a professional and sleek finish while reducing electrostatic interference on the PIR sensor. 

Sealed optics

Protect the detector from possible insect infestation, shields air movement in front of the pyro-electric sensor and protects against adverse reflections from inside the detector housing.

Pet Immune (PI)

The detector’s intelligent PI technology analyses the difference between an intruder and a pet signal, with immunity up to 20kg and 10m coverage range.

• Expand Pyronix hybrid panels
• 32 x wireless inputs
• 32 x wireless keyfobs
• 2 x DELTABELL-WE
• Instant two way device control (ITDC)
• Pyronix High Security Wireless Encryption Protocol
• 868MHz Transceiver FM technology

• Detection range 12m
• Volumetric coverage 90°
• Tri-Signal Detection Logic
• Adjustable PIR/MW range
• Dual-Vision Pet Immune (up to 35kg)
• Up to 1.6km two-way wireless
• Anti-Sway Analytics
• Blue Wave Technology (BWT)
• IP55 heavy duty design
• Flexible installation and easy setup
• Dimensions: 188 x 77 x 84mm
• Battery: 2x BATT-ES1 (included)

• CD Keypad with proximity reader, two inputs and one output
• Quick and easy to set or unset your security system with the built-in proximity tag reader
• Clear LED indication of system status
• Adjustable key-click volume

Compatibility 

Ideal for use on the EURO 46, EURO 280 and Enforcer control panels in a residential or commercial setting.

Ease of use 

You can quickly easily and securely set and unset your security system with either a proximity tag or by typing in your user code.

LED Indication 

Clear LED indication of system status including ready, alarm, tamper, fault and unset.

Customisable 

Pyronix bespoke branding services can add your company logo for a professional uniform finish.

• Piezo sounder technology
• Various colour combinations available
• Watertight polycarbonate plastics
• Pyronix High Security Wireless Protocol Encryption
• 868MHz transceiver FM technology