The FS-HDP4103 video balun is a passive (non-amplified) device that allows the transmission of real-time CCTV HD video signal via cost-effective Unshielded Twisted Paired (UTP) cable. The FS-HDP4103 is compatible with all HD-TVI, HD-CVI, AHD and CVBS analog cameras. The flexible mini-coax pigtail lead allows the FS-HDP4103 to fit neatly inside CCTV camera back boxes or dome camera enclosures and flexible connection with DVR. Screw terminals of the FS-HDP4103 allows easy connection of UTP cable output. Used in pairs, the FS-HDP4103 eliminates costly and bulky coaxial cable. The superior interference rejection and low emissions of the FS-HDP4103 allow video signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The FS-HDP4103 is built-in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.
•Single Channel HD Passive Video Balun
•Real-time transmission over UTP cat5e/6
•No power required
•Compatible with all HD-TVI/ CVI/AHD /CVBS analog cameras
•Color video max up to 190m (623ft) for HD-TVI 720P camera
•Color video max up to 190m (623ft) for HD-TVI 1080P camera
•Color video max up to 200m (656ft) for HD-TVI 3MPX camera
•Color video max up to 180m (590ft) for HD-TVI 5MPX camera
•Color video max up to 440m (1443ft) for HD-CVI 720P camera
•If you adjust saturation of DVR, max up to 470m (1541ft)
•Color video max up to 230m (754ft ) for HD-CVI 1080P camera
•Color video max up to 230m (754ft ) for HD-CVI 4MPX camera
•Color video max up to 320m (1049ft) for HD-AHD 720P camera
•Color video max up to 320m (1049ft) for HD-AHD 960P camera
•Color video max up to 250m (820ft) for HD-AHD 1080P camera
•Color video max up to 180m (590ft) for HD-AHD 3MPX camera
•Color video max up to 200m (656ft ) for HD-AHD 4MPX camera
•Color video max up to 200m (656ft ) for HD-AHD 5MPX camera
•Color video max up to 400m (1312ft) for CVBS camera
•Male BNC with extended 5.9 inch (150mm) mini-coax pigtail
•Two screw terminals connection for UTP cable
•Built-in solid state TVS (Transient Voltage Suppressor) for surge protection
•Wave Filter Design, Anti-Static Design
•Lightning protection design Grade: III
•60 dB crosstalk and noise immunity
•Exceptional interference rejection
•ABS engineering plastic housing
Specification
Applications
• Security Monitoring System
• Multimedia Network Teaching System
• Medical Monitoring Display System
• Industrial Automation Control System
• Banking, securities, financial information display system
• Remote Network Server Monitoring
• Department Store Security
• Casino Security
• Hospitals, Airports and banks
• School Campuses
Note:
1. The actual transmission distance will vary according to specific camera, DVR and on-site environment
2. Please make sure to install transmitter at camera side and receiver at DVR side to achieve best video quality
3. If you adjust saturation of DVR, video transmission distance could be farther.(HD-CVI 720P: max up to 470m(1541ft)
4. If chromatic aberration occurs, please also adjust saturation, the picture will recover perfectly automatically.
5. The device is not waterproof and not to be used at outdoors.
Wire and Cable Recommendations
The FS-HDP4103 is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG..Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair. For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance.
